Model library › Too cold, too hot: the shower

Too cold, too hot: the shower

Hot water takes a few seconds to reach you. Turn the tap too eagerly and you swing between freezing and scalding.

Everyday lifeSchool1 stocks · 1 flows · 8 convertersRuns for 90 seconds

Open it, press Play, then move the sliders and compare the scenarios.

What the model shows

You feel the water a few seconds after you move the tap. If you keep turning until it feels right, you have already turned too far, so it overshoots: too hot, then too cold, then too hot again. The delay plus impatience makes the swing. Try: lower Impatience, or a shorter Pipe_Delay. The same pattern explains why heating, stock levels in shops, and even pig prices go up and down. Time unit: seconds.

Scenarios to compare

  • Impatient
  • Patient

What is in the model

  • Tap Position0 = fully cold, 1 = fully hot.
  • Turning the TapYou turn towards hot when the water feels too cold, and towards cold when it is too hot. The tap cannot turn past fully hot or fully cold.
  • Cold WaterCold water temperature.
  • ErrorHow far the water is from what you want.
  • Hot WaterHot water temperature.
  • ImpatienceHow hard you turn the tap for each degree it feels wrong.
  • Pipe DelayHow long water takes from the tap to the shower head.
  • Tap TemperatureTemperature of the water leaving the tap.
  • Wanted TemperatureThe temperature you want.
  • Water TemperatureWhat you feel: the tap water, but a few seconds later because it has to travel up the pipe.